[ Chinese wardrobe net ] Can the wardrobe door be used as a hanging rail? The answer is of course not. The closet door is a kind of door, and the hanging rail is a slide made for the convenience of the wardrobe door. The two are not a concept. This problem reflects the fact that many people confuse the closet door with the hanging rail door. Here is a look at some of the knowledge of the hanging rail door.

Hanging rail door structure - what is the hanging rail door?

The characteristics of the hanging rail door are that there is no lower rail. For the space that is not suitable for installing the lower rail, for example, the stone floor, the elderly are often moved, and the space of the child is more convenient. The hanging rail door is divided into the following two types: the light hanging rail door: sliding and sliding The styles are various and can be designed according to the common sliding door style. The door frame and door panel materials are completely consistent with the common partition or the closet door. Heavy-duty hanging rail door: The door frame is thick and thick, the door panel is thick, durable and durable. The overall effect of the door body is similar to that of solid wood door, but the service life and grade are better than ordinary wooden doors. The push-pull is smooth and smooth, and the buckle door lock can be installed. Sliding doors must ensure the width of two doors. In the case of less space before and after, you can consider sliding doors. When installing, pay attention to the noise generated when sliding the door, and choose a better hanging rail.

Hanging rail door structure - hanging rail sliding door installation skills

1. When installing the hanging rail sliding door, you need to pay attention to: First, ensure that the width of the two doors must be the same. When the front and rear space is relatively small, do not consider installing the hanging rail sliding door. Before the installation, you need to choose a better quality door, so that the use time can be extended for a long time, good quality and good protection. Another point to note is that during installation, pay attention to noise control so as not to disturb other people around you.

2. At the time of installation, the first thing we need to do is to prepare the required materials: a top rail, a pulley, a elevator, a rotating shaft, a small number of screws, and a door. And the main structure of the entire door frame has been completed, and passed the acceptance, the reserved hole and side decoration have also been roughly completed. We determined that the purpose of this is to avoid repeated construction in the future, which is time consuming, laborious and costly.

3. Then insert the top rail into the pulley, cover, attach the elevator, and make the appropriate level adjustment until the request is reached. Finally, install the two doors, install the matching hardware accessories, observe whether the opening and closing are smooth, without any resistance and inclination, and then fix all the bolts and screws, the whole installation process is completed. It should be noted that during the installation process, the door joints on both sides are adjusted and aligned, otherwise the entire hanging rail sliding door will be uncoordinated.

Through the above article, I hope to make everyone more aware of the hanging rail door. Hanging rail doors and wardrobe doors are not a concept. If you want to know more about the hanging rail door, please visit our website and you will have more knowledge to tell you.

Stove&oven Protectors

Stove&oven Protectors,stove guard kitchenaid,electric stove protector,best gas range protectors,5 burner gas stove protectors

vchomy , https://www.vichenivchomy.com