After the ceiling decoration, the entrance is the installation of various equipment. After the ceiling decoration of the toilet, the first intervention is the installation of Yuba. The Opto integrated ceiling Yuba is the choice of many families. How to install the Pupu Yuba ? The following decoration home network Xiaobian will come to introduce you to the installation method of the Opto integrated bath, I hope this article of Xiaobian can bring you some help and reference, let us look at it together!

Opto integrated Yuba installation method:

1. The first step is the installation of the corner line. The edge strips must be installed flat and firm, then determine the height of the Yuba installation, and then draw a horizontal line.

2. Perform the installation of the keel. The suspended boom and the light steel keel will be placed under the ceiling, then the expansion eye will be fixed and all the booms will be fixed and the main dragon skeleton will be fixed.

3. Install the auxiliary keel. According to the actual installation length, reduce the required keel by 5mm, then put on the triangular hanging piece, and temporarily suspend all the keel with the triangular hanging piece on the main keel according to the drawings.

4. The gusset plate is installed. Wear clean gloves and install the gussets to take into account the overall aesthetics and bilateral symmetry.

5, the installation of the host. When designing the installation position of the heating type host according to the drawing, replace the template with the main panel to confirm the accurate installation position of the main unit; then place the main unit on the top of the keel.

6, the top line and mouth panel. At the top of the line, determine where to install the luminaire, where to install the kitchen and bathroom appliances, and arrange the line in advance. Buckle panel, this link is directly related to the overall effect of the ceiling. Not only

Be flat and do it straight.

Yuba installation notes:

1. The power of the Opal Integrated Yuba is usually relatively large, and the higher can reach more than 1100W, so we must pay attention to the layout of the power supply wiring, etc. Waterproofing must be achieved. The copper core wire also needs to reach a certain degree of thickness. .

2, pay attention to the wire to be placed inside the wall, can not set the open line, the switch and so on also need qualified products, the old-fashioned house is better to replace the relevant wires, etc., carefully caused a bad situation.

3. In the process of use, although the Yuba is waterproof, it is not allowed to directly pour the water on the Yuba. After all, some metal parts are not waterproof, so there may be dangers such as short circuit.

4, after the shower, it is not recommended to turn off the bath immediately, but wait for the room's moisture to dissipate and then shut down. Usually try to keep the bathroom dry and clean, which can greatly extend the use time of the Yuba.

The above is the introduction of the Ou Pu integrated Yuba brought to you by the decoration home network Xiaobian. I hope that I can bring you some help. I wonder if everyone is satisfied with the introduction of Xiaobian? If you still need more information, please continue to follow our selection manual section!

More related wonderful reading:

How to install the bathroom integrated Yuba? Bathroom integrated bathing machine advantages

How to install the integrated Yuba ceiling? Integrated Yuba ceiling installation Raiders

What brand of integrated Yuba is good? How about integrating Yuba?

Is the brand of integrated Yuba good? How to choose integrated bathroom?

Plastic Packaging Tube

Plastic Packaging Tube,Plastic Packaging Tubes,Clear Plastic Retail Tubes,Clear Plastic Packaging Tube

NANTONG OUFEIYA IMP& EXP CO.,LTD , https://www.nantongoufeiya.com