As we all know, no matter what kind of floor, even the rail should have expansion joints. If the floor and the ground are firmly nailed, due to the influence of the climate, the difference between the ground and the floor material, the expansion coefficient will be different, and cracking and deformation will occur. The bamboo floor adopts the scientific suspension installation method, which conforms to the physical characteristics of the bamboo floor. Taking full consideration of the expansion and contraction factors of the cement floor and the bamboo floor, the four sides of the bamboo floor are spliced ​​together, not bonded to the ground, around the wall. Leave a certain expansion joint (safety seam), cover the top with the feet, keep the overall appearance of the floor, and leave a shrinkage space for the bamboo floor, the bamboo floor will not bend.

Suspension installation method, no need to play dragon skeleton, no flat plate, no glue, no nailing, no sanding, no painting (each bamboo floor has been completely closed with imported UV paint, the surface has been formed Sturdy wear-resistant layer) saves time, labor, materials and money (the cost of paving materials is only one-third of the cost of wood floor coverings), and it is easy to disassemble.

First, preparation before installation

1. Level the floor and smooth it with cement slurry.

2. Use asphalt paint to paint the ground 1-2 and enlighten and dry.

3. Paving the floor with a 3mm thick foam board with plastic paper, requiring flatness, no overlap, no wrinkles.

4. Prepare 1.2×1.2cm fir strips for use.

Second, install bamboo flooring

1, the amount of good size, reasonable use of materials. All cut-off plates must be sealed with varnish to prevent moisture.

2. When laying the bamboo floor, place the fir strip (1.2×1.2cm) on the root of the surrounding wall and start paving in the longitudinal direction. The groove surface of the first bamboo floor is close to the fir strip, and then the seam is tightly pressed according to the joint of the tongue and mouth. According to the length of the room, the short board should be cut off to cover the root of the horizontal wall. Bamboo flooring is staggered across the seams.

3. After the bamboo flooring is completely installed, remove the fir boards from the roots of the cadres.

4. Cover the floor gusset with a whole piece of floor around the wall to cover the expansion joint. Use a wood screw or bamboo stick to mount the floor panel on the wall. The wood screws or bamboo sticks can be spotted with a near-color paint (or varnish). Finally, the plane on the gusset is decorated with the same thickness of wood.

Square Fire Pit Burner

HNJBL top-of-the-line Gas Fire Pit burners that will provide an excellent fire source for your picturesque outdoor firepit or your comfy indoor home Fireplace. The stainless steel Fire Pit Burner comes with multiple ignition options making it suitable for most environments.
Natural Gas or Propane? By choosing the HNJBL 480*480mm SS Drop-In ring- Fire Pit Burner System - Match Lit you receive the option of either gas type with a conversion kit provided.
With the HNJBL 480*480mm SS Drop-In H-Burner System - Match Lit there are options from size and shape to heat output. Choose based on your preference or allow for our helpful staff to assist you in the process. Buy today and notice the difference in your firing experience!

Packing

Packing will by carton and pallet

Square Fire Pit Burner,Square Log Burner,Square Fire Pit Burner Kit,Square Fire Pit Insert Kit

Henan Jinbailai Industrial Co.,Ltd , https://www.hnjblgrill.com