Backpack [outdoor equipment] - Measurement method

When choosing a backpack, we may say that we want to measure the data and select the right backpack. Then everyone knows how to measure it. The following Xiaobian will take everyone to find out.
Back length:
The length of the long back measuring backpack is determined by the back length of the body and is not determined by the height. The method for measuring back length is to let others measure their backs with a soft ruler.
Starting from the position of the 7th vertebrae, it is the position where you can feel the bone protruding from the back of the neck. Here is the junction of the neck and shoulders. From this down to the position of the upper edge of the pelvis. The method of determining the position of the upper edge of the pelvis is to put your hand on the hips. You can touch the sacrum (commonly known as the big sacrum), and the sacrum is located symmetrically in front of the buttocks. With his hands pressed to his hips, his thumb is pressed against the lower back.
The so-called back length is the length between the seventh vertebra and the pelvis line.
Waist circumference:
Measure the circumference of the pelvis along the circumference of the girth. The backpack has a body weight of 4.5 kg to 6.8 kg. The top of the belt should be 2.5 cm above the pelvic line. Try to lift your legs so that the thighs are parallel to the ground. At this time, the bend of the leg should be as high as the bottom edge of the belt. If you raise your leg and the thigh lifts the belt up, then raise the backpack a little from your hips. The common mistake people make is usually putting the backpack too low.
Adjusting the chest strap Measure the circumference of the pelvis along the circumference of the waist. Measuring the circumference of the pelvis The circumference of the waist circumference The chest strap on the waist strap can move upwards or downwards. Can be moved to a comfortable position without affecting breathing.
Shoulder straps and piggyback lifters should be fixed and the strap carrying the lifter pulled tight and placed at a 45-degree angle from the horizontal.
The above is how to choose a backpack to measure.
This article is selected from China Backpack Exchange Network

Paper Products

Paper A sheet made of plant fibers, used for painting, printing books and newspapers, and packaging. Paper: The general term for paper. The paper is counted in sheets, so it is called. Paper is generally divided into: letterpress printing paper, newsprint, offset printing paper, coated paper, book cover paper, dictionary paper, Copy Paper, board paper, etc.


There have an recycled paper. Broadly speaking, the paper produced by recycling used waste paper to make recycled pulp and replacing raw wood pulp with it can be called recycled paper. For example, industrial waste kraft cartons are used as the main production raw materials, and the gray bottom layer of general cardboard uses mixed waste paper as the main production raw materials. These products can be called industrial recycled paper. Generally, cultural paper used for writing and printing is mostly made of bleached chemical raw wood pulp as raw materials, and this paper can also be made from waste paper raw materials. The produced cultural paper is called recycled paper.


The use of recycled paper has the following advantages:


1. It can slow down the rate of deforestation and protect the ecological environment;
2. It can extend the service life of garbage landfills;
3. It can save energy and reduce pollution;
4. It can reduce the fatigue of eyes reading

Paper Products,Printer Paper,Graph Paper,Notebook Paper

Shijiazhuang Qiancen Industry Co.,ltd , https://www.yuyilang.com