[ Chinese wardrobe net ] The locker plays a very important role in our daily life, helping us to store the clothes that are replaced all year round. With the development of society and the progress of the times, the quality of our lives has gradually improved. Over the past few years, there have been major breakthroughs in the materials, styles and color combinations of lockers.

Wardrobes are generally used in public places such as schools, offices, sports fields, etc., to store clothes and close the wardrobe for people to change clothes. Here is a brief introduction to the wardrobe buying and maintenance skills.

First, the purchase skills

1. The thickness of the large wardrobe legs is required to reach 2.5 cm. It is too thick and too clumsy, and it is easy to bend and deform. It is found that the wood has insect eyes and ends, indicating that the drying is not complete. After checking the surface, open the door and drawer door to see if the inner material is rotten. You can use your fingernail to lick it. If you break it in, it means that the inner material is decaying. After opening the door, smell it with your nose. If it is nose, glare, or tears, it means that the formaldehyde content in the glue is too high and it will be harmful to the human body.

2. Pay attention to check the cabinet door. The slit of the drawer should not be too large. It should be horizontal and vertical, and the door should not sag.

3. Small wardrobes, such as chairs, stools, hangers, etc., can be dragged on the concrete floor when picking, gently falling and falling, the sound is crisp, indicating good quality; if the sound is dumb, there is a murmur in the voice, indicating The blink of an eye is not tightly integrated and the structure is not strong.

4. The veneer of the veneer is not strict, whether it is veneer veneer, PVC or pre-painted paper, we must pay attention to whether the skin is flat, whether there is drum, foaming or not.

5. Look at the light when checking, otherwise you can't see it. The ash veneer veneer veneer is more vulnerable to damage, generally only two years. In the case of wood veneers, the veneered veneers are better than the chopped ones. The way to identify the two is to look at the pattern of the wood. The wood texture of the cut veneer is straight and dense, and the veneered veneer pattern is curved and sparse. The particleboard veneer is more closet, the ground part must be edged, and the edgeless board will absorb moisture, swell and damage. Generally veneer locker <office chair> corners are easy to tilt up, you can use your hand to rub the corners when you pick it up. If you get up, it means there is a problem with the glue.

Second, cleaning and maintenance

1. To maintain the steel locker and restore its original luster, you can add a little vinegar to the hot water, then use a soft cloth to lick the vinegar water, gently wipe it, pay attention to not too much force, otherwise it will damage the locker. Paint film. To maintain the locker, you can also use the milk to remove the smell of the locker. First, put a cup of boiled milk in the locker, then close the door and wait until the milk is cool before removing the milk, so that the original smell in the locker It can be removed.

2. Regular cleaning and maintenance. In the daily use of the locker, always wipe the dust or stains and keep them clean. When cleaning, try to use a soft cotton cloth that is not easy to remove hair. If it is too hard, rough rag or wipe with foreign body cotton cloth, it will grind the paint surface and lose its luster. Do not rinse the locker with hot water, alkaline water or disinfectant water, as this will damage the paint on the surface of the locker.

3. Place the locker in a stable position to ensure the use of the locker and prevent damage to the locker structure. If the locker is placed in a state of swaying and unstable, the fastener will be loosened for a long time, and the joint part or the connecting piece is loosened, and the joint part is cracked, which affects the service life of the locker. If the ground is not flat, be sure to put the locker legs underneath.

4. To maintain a ventilated and dry environment. Frequently keeping the indoor ventilation, the indoor humid air can be exchanged with the outdoor, and the chemical substances in the wooden locker can be volatilized as much as possible to the outside. It is common practice to open the window or the door frequently to make the air convection. Or use air conditioning system and ventilation system.

Face Powder

What are the functions of face powder?

1. Make up is lasting. This is its most basic function, and it is also the most recognized and familiar function, because if you do not fix makeup, it is easy to spend makeup, and will also take off makeup. With powder powder, these problems will be solved.

2. Concealer. Loose powder also has a concealer effect, which can block the defects on the face that cannot be covered by liquid foundation or air cushion. It also has the function of hiding large pores. If there are prominent pores or blackheads, it can be solved by powder dispersion.

3. Absorb oil and brighten skin. The powder has a strong adsorption effect on oil. Whether it is applied on the face or hair, it can ensure the dryness of the skin and hair, without worrying about too bright oil. And its brightening effect on skin color is obvious.

Face Powder,Makeup Setting Powder,Loose Setting Powder

Suzhou Yimeijia368 Biological Technology Co.,Ltd. , https://www.ymjbeauty.com