The stainless steel electric distilled water heater uses electric heating to drink tap water, and uses distilled water to prepare pure water, which can be used by medical and health, pharmaceutical, electroplating, and laboratory departments. The product is easy to use, simple to operate, and features more high-quality imported stainless steel materials, specially processed and carefully processed. Not only the quality of distilled water is fully guaranteed, but also the service life is greatly improved.

This product is mainly composed of stainless steel evaporation pot, condenser and electrical device.

Instructions:

1. First close the drain valve.

2. Open the water source valve so that the tap water enters the condenser from the inlet control valve and then flows into the funnel from the return pipe, and then injects into the evaporation pot. Until the water level rises to the center of the glass water level window, the water source valve can be temporarily closed when the water level discharge pipe flows out and its water level stops rising.

3. Turn on the power, wait until the water in the pot has boiled, and then turn on the water source valve. However, it should be noted that the water flow should not be too large or too small. The water source valve should be gradually opened from small to large, and the water output of the distilled water should be adjusted to the maximum, and a small amount of overflow should be added to the water cup. The temperature of the distilled water is about 40 °C.

4. The distilled water should not be too long, and should not be inserted into the distilled water container. The leather tube should be cleaned and re-washed with distilled water before use, and should be kept open to prevent leakage of water and water.

5. The outer wall of the condenser has a hot hand feeling, which is normal, otherwise no distilled water will flow out.

maintenance

1. Wash the inside once every day before use, and drain the water, replace the fresh water, so as to avoid the scale caused by the water quality, affecting the use effect.

2. The impurities in the water source will be left behind by evaporation. Especially if the tap water is poor in water quality and has not been treated, after evaporation, the deposit will be left with sediment <scale>, condensed on the barrel wall, the surface of the electric heating tube, and the condenser. The inner wall of the outer casing, the return pipe, etc., accumulate over time, not only hinder the smooth flow of the waterway, but also affect the condensation effect, so as to reduce the amount of water produced; for the electric heating pipe, it will also accumulate its heat and shorten its service life. Therefore, the scales in the above places should be removed frequently. Removal method: A layer of dirt can be washed on the surface with a brush. However, depending on the combination of dirt, a weak acid or weak alkali solution is used For Cleaning. Please be careful when washing: Do not use excessive force to damage the parts.

3. The heating element of the distilled water is an immersed electric heating tube. Its structure is made of nickel-chromium alloy as the heating main body, buried in the center of the copper tube, and surrounded by magnesium oxide as the insulation. Therefore, once the water is cut off, the heat generated cannot be absorbed by the water, which will cause the copper tube sheath to burst and burn. Therefore, it must be submerged in water for use.

4. The distilled water must be operated by a special person, and must be clearly explained when changing the new operator.

5. The electrical part should be checked regularly and reliably grounded.

6. If the user replaces the electric heating tube by maintenance, the gasket at the joint must be well-lined to ensure no water leakage. Otherwise, the head of the electric heating tube will break down the insulation when it is energized due to the adhesion of water droplets. The nut should be tightened at the joint of each wire to avoid sparks after power-on and burn the head of the heating pipe.

7. If the new distilled water is purchased, it should be cleaned first and then evaporated for more than eight hours to clean the inside. It is then officially used to ensure that the water quality meets the requirements (cleaning can be carried out according to 2).

Carbon Cleaning Towel

The woven-in carbon fibers increase the coefficient of friction of our microfiber cloth and leave even stubborn dirt on your car windows no chance.

Carbon Cleaning Towel

Changshu Juhao Clean Textile Co., Ltd. , https://www.juhaoclean.com