In 1979, the German Standards Association established the "DIN" standard for pharmaceutical packaging, which introduced a more user-friendly solution. The D? standard is based on changes in the material of the packaging lid and changes in the technology of wearing L. The specifications for push-pull and pull-type rigid foam liner packaging have all appeared. These specifications are in line with the requirements of policies and regulations. Compared with similar standards in the United States, they use less extreme measures. This is very reasonable. Due to the relevant regulations of the British Non-prescription Drug Administration (PAGB) and non-prescription drug manufacturers' associations, the use of rigid foam liner packaging and slat wrapping has increased in recent years. However, there is no increase in the probability of drug abuse.
Many European countries are considering legislation on rigid foam liner packaging, and Europe will soon establish its own regulations. By then, in all member states of Europe, new laws will replace existing laws. At the same time, drug manufacturers must find ways to find a compromise solution so that drugs designed in the new law can be guaranteed to be child-safe, while not violating the principle of convenience for adults. This compromise is also a solution. It has the least impact on the production process and production costs of medicines.
In all business areas, the cost department is the core factor. The average life expectancy in most countries in the world is constantly increasing: This is a very good situation, but this situation also makes the budget of medical care inevitable. . As a result, the government put pressure on drug manufacturers to force them to lower drug prices. This debate continues until today, and over the past decade, there have been some changes in the way pharmaceutical companies operate. The new business model has a very big impact on the role of rigid foam liner packing machines, and it also breaks the dividing line of the traditional packaging machine manufacturing industry.
The biggest change occurred at the level of resource utilization. Traditionally, the level of utilization of equipment by the pharmaceutical sector is much lower than that of other industrial sectors. This is because the outsourcing company in rice production is more concerned with the flexibility of packaging machines. Reliability and ease of operation and other performance. The integrated rigid foam liner packaging line can well meet these needs to avoid cross-contamination issues. Many production lines are dedicated to the production of specific drugs. However, under the pressure of reducing drug prices, drug manufacturers have to find ways to cut costs in order to maintain profits.
However, it is not feasible to have a large number of drug warehouses and production facilities idle for a long time and wait for the production of the next batch of drugs. More and more production lines are used for the production of many different medicines, so that there have been "downtime" problems for cleaning equipment and changing production methods.
According to the production schedule of the dedicated production line, the time taken to change the production line will basically not affect anything, because the next product will not start production immediately. Another factor is that the quantity of products for each batch of demand will gradually decline, because buyers will also adjust strategies to reduce the amount of raw materials in order to reduce costs. Markets in different countries will use different policies and regulations, which will affect the packaging specifications of the drug (ie, the number of drugs allowed in each package), and how much market information can be printed on the package, and where it will be printed.
Many new paradigms have emerged. The most important point is that the fastest does not necessarily represent the highest productivity. For example, the current rigid foam liner packing machine can pack 1200 products per minute, which can well meet the large production process of half of the products, but when the output of each batch of products is less than 1,200, then try to change the packaging machine. The speed of production and the method of saving production in the world are completely infeasible. When manufacturers choose packaging machines, they are more and more inclined to consider their own production scale, and choose the right packaging machine: how many batches of products to be produced in total, and how large each batch of products is, ensuring that production time is the core issue, so Equipment manufacturers continue to work hard to design better equipment; according to the GMP regulations for the cleaning of pharmaceutical production equipment, easy-to-clean machines are designed, and these machines are easily changed. Suitable for the production of multiple products
Due to the introduction of some measures, such as reducing the amount of parts used, making quick disassembling tools, and writing instructions on the surface of the machine, it is not difficult for the outsourcing company to control the time to change the equipment within 30 minutes. Adaptability and ease of change have always been crucial factors. In the past, only those packaging services that brand owners thought were either unimportant or low-value products would be outsourced, or they would be outsourced by manufacturers to supplement their internal packaging capabilities. However, there will always be similar outsourcing services. The current trend is that for companies, outsourcing has become part of the strategic plan. Because now, the cooperation mode of the peace treaty has become very mature both in terms of quantity and reputation. Many examples clearly show that outsourcing production methods will be more flexible, professional and more cost-effective than internal production methods.
Outsourcing is now a value-added service rather than a blank service. The pharmaceutical production industry needs a production facility that is easy to operate, highly flexible, and easy to change, and that can work stably for a long time. Equipment manufacturers are also increasingly considering these needs.
According to the different sealing methods used by the packaging machine, the rigid foam liner packing machine can be roughly divided into two categories: pressure plate type or rotary type. With a pressure plate type packing machine, the sealing surface of the package is flat, because the sealing is sealed by the pressure of the upper pressure plate and the lower pressure plate. The rotary type packaging machine flows the product between the two rollers for sealing. operating.
Traditionally, rotary seals are faster. But the pressure plate seal can provide greater flexibility, suitable for large-scale, non-standard product packaging, such as bottle in. Since the bottle cannot flow between the two rollers, a rotary seal cannot be used and only a pressure plate seal can be used. As for the choice of sealing method. This mainly depends on the production situation: the type and size of the product to be packaged. There should be no obvious difference in seal quality, permeability, and appearance between products that are packaged in two types of sealed 1:3. Otherwise, any change at any point will greatly influence the buyer’s purchase decision. So, what kind of rigid foam liner packing machine is in line with today's trends. The fastest speed does not necessarily mean the highest production efficiency.
The ideal packaging machine, simple high production is no longer the decisive factor. Machine adaptability becomes more important, and the purchaser will also take into consideration the cleaning time of the machine and the time it takes to change the equipment, the ratio of space occupied by the machine to its output, and whether it is easy to operate. The advancement of science and technology in recent years has promoted the development of packaging machines. These technologies include: Extended Markup Language (XML) technology, which is a new type of open standard that facilitates the integration of ancillary equipment and downstream equipment and makes daily operations easier. The extensive use of servo technology has strengthened a series of functions of the packaging machine.
In addition to the above factors, the packaging machine supplier will also provide a wide range of services, such as training, certification support, maintenance services and quickly provide the appropriate tools, so that your rigid foam padding machine can be used for many years.