Sales center feedback: During the daily sales process, many customers have asked, how to use our UV cross-linking instrument? What needs to be noted? Here, Xiaoliang from the editorial department deliberately learned about the product from our technical center and obtained For the answer, the following is the information compiled by Xiaoliang, and some of the descriptions are similar to those on the Internet, because the products are similar, and the methods of use and precautions are also similar!

First place the UV cross-linker equipment horizontally on the workbench. Make sure there is enough space to open the door in front of the equipment. Insert the female end of the power cord into the cross-linking agent. Plug into a properly grounded electrical outlet.

Note: The correct working voltage of the crosslinker is found on the product information label. For 230V models, or those that require special power cord connectors, make sure the male connector or plug is properly configured and the power cord is properly connected.

Turn ON / OFF switch to ON position.

Note: When the cross-linking agent defaults to the last UV exposure setting used.

The final UV exposure setting will be displayed on the LED. The last function setting will be indicated on the red dot (S) on the illuminated display panel. Expose your request to enter your sample into the conference hall.

 Front Lit Led Letters are very common in LED letter signs. This kind of letter sign uses LED modes to illuminate through the front face of letters or signs. Usually, we use translucent acrylic sheet as face, colored or with a vinyl printing.  The size of front lit LED letter can be small or large, from 10cm to 300cm in height

Front Lit LED Letters

Front Lit Led Letters,Led Front Large Bulb Letters,Led Front Lit Channel Letters,3D Front Lit Led Letters

Smart Sign Manufacture Co., ltd , https://www.sign-make.com