PT-125 plate machine product technical features, washing form: immersed development plate design, development, washing, gluing, drying one-time automatic completion; man-machine interface: large LCD display, six-button operation, machine function and The operating status is clear at a glance, this article will introduce you to Hengyu Rising Machine.

The development of a plate printer means a process of expressing a latent image which is formed by exposure on a film or a plate by using a reducing agent. The development of the PS version is that when the printed image is displayed, it can have the printing layout and layout performance that meets the printing requirements.

According to the working principle of the violet laser newspaper CTP, the printing plate enters the platen machine and then needs to be preheated and solidified first, then passes through the brush to the developing solution tank, and waits until the printing plate comes out of the developing solution tank. The procedures of washing, gluing and drying are started, and finally the finished product can be produced.

It can be known that under normal circumstances, the brush roller needs to be rotated in time to ensure that the film on the printing plate can be cleanly cleaned; the developer replenishing pump needs to be added in time when the developer is insufficient, and the developer solution is not sufficient. Need to add again.

Use the special cleaning agent for the platen machine, just dilute the concentrate with water, heat it to the developing machine tank and heat it to 30 °C, and start the cycle for 30 minutes to clean the dirt in the tank. Or dilute the concentrate with water, dip with a brush, brush the tank, rubber roller and brush. Please refer to the product's instruction manual for the specific dilution ratio.

Article source address: http://

Alternator Generator

An alternator is defined as a machine or generator which produces AC (Alternating Current) supply and it converts mechanical energy into electrical energy, so it is also called an AC generator or synchronous generator. There are different types of alternators based on applications and design. The Marine type alternator, Automotive type alternator, Diesel-electric locomotive types alternator, Brushless type alternator, and Radio alternators are the types of alternators based on the applications. The Salient Pole type and Cylindrical type are the types of alternators based on the design.

Construction of an Alternator

The main components of an alternator or synchronous generator are rotor and stator. The main difference between rotor and stator is, the rotor is a rotating part and stator is not a rotating component means it is a stationary part. The motors are generally run by rotor and stator.

We have maglev generator which with low rpm generator like 100w 200w 300w 500w 1kw 2kw 3kw 5kw 10kw 20kw 30kw, low torque is the advantage and high efficiency. Could use for Vertical Wind Turbine

Permenant magnet generator is with range from 100w to 500kw with all kinds of rpm and base.

Could use for Horizontal Wind Turbine

Applications

The applications of an alternator are

· Automobiles

· Electrical power generator plants

· Marine applications

· Diesel electrical multiple units

· Radiofrequency transmission

Advantages

The advantages of an alternator are

· Cheap

· Low weight

· Low maintenance

· Construction is simple

· Robust

· More compact

Disadvantages

The disadvantages of an alternator are

· Alternators need transformers

· Alternators will overheat if the current is high

Alternator Generator,Low Rpm Alternator For Wind Turbine,Pmg Alternator,2Kw Low Rpm Alternator

Wuxi Smaraad New Energy Technology Co., Ltd. , https://www.smaraadenergy.com