The proofing machine is an indispensable printing equipment in the printing process, especially for the design of the appearance of the item. The small partners who are familiar with the whole printing package should know that the proofing process is wrong, which will inevitably affect the whole shipment. Printing will also be affected, this article focuses on the safety operation procedures of the proofing machine.

1. The special material truck must be used for loading and unloading to prevent the material from falling.

2. For sharpening the scraper, special gloves for cutting hands must be used.

3. For the upper and lower plate rollers, the special-purpose car or the special-purpose car for the plate must be placed in the balance position of the plate. It is forbidden to use the hand plate wheel gear turntable.

4. The equipment must be honked to inform the relevant personnel.

5. Do not touch the guide roller by hand during the operation of the device.

6. Do not wear gloves to wipe the ink at both ends of the rubber roller during the operation of the equipment.

7. If the scraper or the picking line is adjusted after the device is turned on, it must be processed by the leader, second-hand monitoring, and if necessary, stop processing.

8. If there is foreign matter on the rubber roller during the operation of the equipment, it must be stopped.

9. The device bites into the pressure roller and must not be rubbed by hand or other items.

10. When the winding and unwinding cannot be carried out normally, the machine must be shut down for repair, and the film should be filmed with a hand or with a paper cutter.

11. When the paper fails to be taken, the film is broken.

12. The second layer and three layers of the equipment on the broken film should be safe to prevent people from falling from a height.

13. The upper and lower embossing rollers must be loaded or unloaded at the same time by two or three people.

14. Enter the correct slot.

15. Clean the ink left on the ground at any time to prevent the operator from slipping.

Article source address: http://

Fence Panel

Fence Panel,Welded Wire Mesh Panel,Chain Link Fence Sections,Metal Fence Panels

Anping County Hua Guang Wire Mesh Production Co.,Ltd , https://www.hgwirefence.com