What is the paper cutter operating procedure?

Answer: The cutting machine must perform the operations such as blanking to guarantee the safety of the person and the machine. The operating rules of the paper cutting machine mainly include the following points:

(1) Before operating the paper cutter, first apply lubricating oil, and check for malfunctions such as mechanical failure, loosening of screws, and movement of rules, etc., and wipe the clean stain on the cutter head:

(2) When starting operation, it is necessary to send a signal. After the air is cut, the knife is cut without any error. After checking the dimensions, it can be trimmed normally:

(3) During the normal operation of the machine, it is forbidden for both to operate the hand-touch brake or the foot brake at the same time. When it is found that the paper basket is not neat or the size of the cutting is wrong, it must be stopped in time. Do not insert the hand into the knife in the cutter head (that is, the handling action of quickly touching the paper tray during operation), resulting in personal faults;

(4) To clean up the workplace after work and maintain civilized production; do a good job in the handover process to ensure the smooth production of the next shift;

(5) In the normal operating condition, the paper cutting machine is rubbed once every two weeks;

What are the folding machine operating procedures?

Answer: The operating rules of the folding machine mainly include the following points:

(1)Before starting the folding machine, make all preparations, such as checking whether the main parts and screws are loose, whether the rules are moving, whether there are oil stains in the passages, and add a good lubricating oil;

(2) When starting the machine, first open the motor to make the machine idle (or start the clutch, switch on the connection of the front and rear car feeders and the folding machine), and after starting the air pump, the paper will enter the folding machine. page;

(3) When starting the machine, it is necessary to send a signal first, check the operation status of the vehicle, and then send a signal to hang the long-distance vehicle without error and gradually change to the normal speed;

(4) In the normal operation of the machine, it is necessary to check at any time, failure should be analyzed in a timely manner, parking to exclude, avoid booting to eliminate or tamper with the various parts, after the elimination of the signal still have to boot:

(5) During the operation of the machine, the operator must stick to the work position, focus on energy, pay attention to the operation of the machine at any time, and ensure that the folding machine smoothly folds pages;

(6) In the case of a normal operation of the folding machine, a single shift (8 to 12 hours) is checked once every two weeks; 2 or 3 shifts (16 to 24 hours) are checked once per week. The machine should be cleaned and the air path should be unobstructed to ensure that it can be normally started after scratch inspection.

What is the operation procedure of the collating machine?

Answer: The operation rules of the collating machine mainly include the following points:

(1)Before starting the machine, the leader and the assistant must first apply grease and wipe the oil on the post passage, and then check the main parts for loose screws, falling off, and whether the air path is unblocked; The books are prepared in order and stored in the book hopper;

(2) Before the collation (or before every collocation of the collation), the leader should take the signatures in the book doubling buckets according to the order, and check the book with the sample book. The assistants and the team leader can confirm the correctness of the three-party system before the start of page layout.

(3) When starting the machine, it is necessary to send a signal first, and then the normal operation of the long-distance car will be carried out after the car is no fault;

(4) During the normal operation of the collation machine, the leader and the assistant should cooperate with each other, and often check whether the new book is correct. When the collating machine fails, it is necessary to stop the vehicle in time for elimination, and avoid booting to avoid accidents:

(5) To clear the workplace after work or shutdown, and to complete the handover procedures to ensure the smooth operation of the next shift;

(6) In the case of normal operation of the collating machine, a single shift (8 to 12 hours) will be checked once every two weeks, and 2 or 3 shifts (16 to 24 hours) will be checked once a week. The machine should be cleaned and the air path should be unobstructed to ensure that it can be normally started after scratch inspection.

What are the operating procedures for wire staplers?

A: The wire stapler operating procedures include single, double head stand-alone content.

(1) All preparations should be done before starting the machine, such as pouring oil, checking the condition of equipment, etc.;

(2) According to the book thickness, paper quality, correct selection of wire diameter, and set a good pressure and spacing;

(3) When the power is turned on, the signal will be given. After the trial is qualified, the book can be booked normally.

(4) During the staging process, it is necessary to constantly check whether the book is in compliance with the standard requirements. If any problems are discovered, stop the process in time and do not start the system.

(5) All crews cooperate with each other and stick to their positions to ensure smooth production;

(6) The single class (8 to 12 hours) should be wiped once a week, and 2 or 3 classes (16 to 24 hours) should be wiped once a week. The scratch detection time is usually 2 to 3 hours.