[ Chinese wardrobe net ] The quality of the board directly affects the quality of the wardrobe . We can choose the corresponding board according to our own needs. Next, let Xiaobian take you into the world of the board!

Wood board

Wood board, commonly known as large core board, is a plywood with a solid wood core. The core sheet has a high bending strength and a relatively low bending strength. Most of the market is now solid, glued, double-sided sanding, five-layer blockboard, which is one of the most commonly used plates in decoration.

These plates have good screw strength, high strength, good quality, sound absorption, heat insulation, etc. The water content is not high, between 10% and 13%, the processing is simple and the most widely used.

Particle board

Particleboard is a piece of buds, small diameter wood, fast-growing wood, wood chips, etc., which are cut into certain specifications, dried, mixed with rubber, hardener, water repellent, etc., and pressed at a certain temperature and pressure. A wood-based panel is called a particle board because its section is similar to a honeycomb.

The surface of the particleboard is flat and the weight is even. It can be used for painting and various veneers. However, due to the large amount of glue used, the environmental protection level is relatively low.

Fiberboard

Fibreboard, also known as MDF, is made from plant fiber as the main raw material, through hot grinding, sizing, paving, hot pressing and other processes. The fiberboard has a density, the low density board fiberboard below 450kg/m3, the medium density fiberboard of 450-880 kg/m3, and the hard fiberboard above 880 kg/m3.

This plate retains the original fiber, is pressed at high temperature, has good surface flatness, fine material, good stability, strength and hardness are better than particleboard, but it is not resistant to blisters. The amount of expansion after blisters is about 2mm on one side. Therefore, the MDF is more suitable for a drier environment such as a wardrobe.

Finger joint board

Finger joint board, also known as integrated board, laminated material, finger joint material, the board which is made up of deep-processed solid wood small pieces. Because the wooden board adopts a jagged interface, it is similar to the cross-docking of two fingers, so it is called the finger joint board. . Since the raw wood strips are cross-coupled, such a combined construction has a certain bonding force, and since there is no need to stick the upper and lower surface plates, the glue used is less.

Due to the small number of joints of solid wood plates, the amount of glue used is also small, relatively environmentally friendly, easy to process, cutting, drilling, sawing and forming. Good quality of solid wood finger joints is guaranteed, but the cost is better. high.

Ecological board

The surface of the eco-board is made of high-quality solid wood veneer or technical wood, which is made by several processes such as cold pressing, hot pressing, sanding and health. Since the multi-layer solid wood board is not easily deformed, and the indoor temperature and humidity can be automatically adjusted, the surface layer solid wood skin material has natural natural wood texture and hand feeling, so the selectivity is stronger. Therefore, it is highly favored by consumers.

Lint Roller

Lint Roller,Lint Roller For Clothes,Clothes Roller,Lint Remover Roller

BRIGHTNESS INTERNATIONAL CORP.,LTD , https://www.webrightsource.com