Product introduction:
The equipment with independent innovation and development: Adopt light, electricity, gas, three-in-one high automatic production equipment. Including:  human-computer interface adjustment(Touch screen) ,frequency control,Precision servo PLC programming control system,New Type Machine,Automatic counting,Universal constant temperature heating, etc.



The main configuration and performance of the equipment

1)Production capacity:20-70 M / min (speed is related with the length of bag and the gram weight of paper.
2)The finished bag cylinder width:  Specifications: 300-600mm, free adjustment( the bag cylinder, straight and fold edge)
3)  1. Bag cylinder length: unlimited, PLC determine length;
     2. Touch screen control;
     3. Machine speed control: Frequency control (Delta)
     4. Cutting bag with variable speed, Computer programming
4)The layers of finished bag cylinder width: Three layer paper( two layer paper and one layer film)
5)Total power: 26KW
6)Total machine weight:  9 ton( around)
7)Equipment overall dimensions: Lengh23m×Width2.6 m×Height 2.1m
8)The maximum permissible diameter of paper roll: Ф1250mm, The maximum width of side:1400mm
9)Allow web core diameter:Ф75 mm
10)Allow paper gram weight: 75-110
11)Control method: DELTA servo control system
12)Buyer power condition: 380±10V  50Hz 
13)1200 Four color flexo printing machine: 1 set(The overall structure of the machine is casting,frequency converter control,  speed can be random adjusted in the production in order to meet the requirement of synchronous operation. Printing speed: 10-50m per minute. Equipped with one type of printing roller)
1. Photoelectric counting and proximity signal switch: Made in Germany
2.Coil inertia removing stop device: Full automatic electronic control system,( no matter the size of the paper roll, the paper will automatically coordinate the expansion force, equipped with 3 sets 10 kilograms of brakes).( The secondary machine is a mechanical type, do not have this automatic function).
3. Roll feeding unit adopts pneumatic shaft core: 3 sets(45# steel: hard chromium plating on the surface) ; The 3 layer paper feeding rack is a new heavy paper placing rack.
4. Power supply condition :380V ,50HZ
5. The machine operator: 2 people

The main mechanical structure material
 1. The host uses speed body plate.
 2. The main material used GB 80-200*, steel
 3. Other mechanical components and structure of special-shaped parts are made of 45# steel, A3 steel, cast iron and special material

The main machine unit
 Feeding unit, printing unit, forming mechanism, medium pressure rubber unit, traction unit, transverse cutting unit, breaking unit, pull and feed unit, raphe glue mechanism, clearance pocket conveyor, broken bag unit, trapezoidal bag cutting unit, rear synchronous feeding unit, working table.

Main Electrical List
1. Touch screen:  1
2. PLC: 1 Delta;
3. Frequency conversion motor: (Made in Jiangsu)380V,Taiwan inverter driver , Speed controller
4. One set servo system(wheel cutting) 380V;
    Mo 1.1 /Nm Io  Nn1200r/min
    MN 16  5Nm In    Ke22  5V/100rmin
    TH.CL.F.  IP64
5. Servo motor and servo driver  380V;
6. DZ47 breaker    1P 20A 1P 6A;
7. Intermediate relay  HH52P  AC200V;
8. AC contactor coil  AC220V  60A;
9. Mushroom stop self-locking switch (red), button:Schneider;
10. Indicator light (green);
11. Solid state relay (single phase 1.5KW);
12. Alarm lamp (sound, light);
13. Proximity switch:2   (Made in Germany)
14. Switch power supply  DC24V  2.1A;
15. change-over switch;3,Schneider;
16. Universal temperature control meter (Made in Shanghai).
17. Photoelectric color sensor:(Made in USA).

4 color 1200mm flexible relief printing parts
Printing machine / host part main Parameter:

1. Machine type:   3/ 1200mm
2. Printing material: Drum kraft paper, 75-110g   
3. Maximum printing width:  1100mm    
4. Maximum printing length: 300-1000mm
5. Printing speed:  10-50m/min
6. Plate thickness (including double-sided adhesive): 3.64mm
7. Machine size: 5000*2200*2100mm

Discharge part

1. Roll length: 1200mm
2. Effective printing roll length: 1000mm
3. Roll core diameter: 76mm
4. Maximum discharge diameter: 1250mm

Printing Part:

1. Printing composition:  Chrome roller  printing roller  Anilox roller  roller
2. Roll perimeter: Equipped with one set,( Customer determine size)
3. Printing plate material: Resin offset
4. Printing registration: 360 degree rotation( Each set stir the ink Standby)
5. Up and down version adjustment: Automatic(Medium machine manual)

Heating and drying part:

1. Heating drying method: Blowing heating
2. Heating area: three color: 10pcs
3. Heating power: 1200mm type 6kw
4. Fan power: 0.75kw
5. The main machine adopts frequency converter to control speed, online synchronous

Product introduction:
The equipment with independent innovation and development: Adopt light, electricity, gas, three-in-one high automatic production equipment. Including:  human-computer interface adjustment(Touch screen) ,frequency control,Precision servo PLC programming control system,New Type Machine,Automatic counting,Universal constant temperature heating, etc.



The main configuration and performance of the equipment

1)Production capacity:20-70 M / min (speed is related with the length of bag and the gram weight of paper.
2)The finished bag cylinder width:  Specifications: 300-600mm, free adjustment( the bag cylinder, straight and fold edge)
3)  1. Bag cylinder length: unlimited, PLC determine length;
     2. Touch screen control;
     3. Machine speed control: Frequency control (Delta)
     4. Cutting bag with variable speed, Computer programming
4)The layers of finished bag cylinder width: Three layer paper( two layer paper and one layer film)
5)Total power: 26KW
6)Total machine weight:  9 ton( around)
7)Equipment overall dimensions: Lengh23m×Width2.6 m×Height 2.1m
8)The maximum permissible diameter of paper roll: Ф1250mm, The maximum width of side:1400mm
9)Allow web core diameter:Ф75 mm
10)Allow paper gram weight: 75-110
11)Control method: DELTA servo control system
12)Buyer power condition: 380±10V  50Hz 
13)1200 Four color flexo printing machine: 1 set(The overall structure of the machine is casting,frequency converter control,  speed can be random adjusted in the production in order to meet the requirement of synchronous operation. Printing speed: 10-50m per minute. Equipped with one type of printing roller)
1. Photoelectric counting and proximity signal switch: Made in Germany
2.Coil inertia removing stop device: Full automatic electronic control system,( no matter the size of the paper roll, the paper will automatically coordinate the expansion force, equipped with 3 sets 10 kilograms of brakes).( The secondary machine is a mechanical type, do not have this automatic function).
3. Roll feeding unit adopts pneumatic shaft core: 3 sets(45# steel: hard chromium plating on the surface) ; The 3 layer paper feeding rack is a new heavy paper placing rack.
4. Power supply condition :380V ,50HZ
5. The machine operator: 2 people

The main mechanical structure material
 1. The host uses speed body plate.
 2. The main material used GB 80-200*, steel
 3. Other mechanical components and structure of special-shaped parts are made of 45# steel, A3 steel, cast iron and special material

The main machine unit
 Feeding unit, printing unit, forming mechanism, medium pressure rubber unit, traction unit, transverse cutting unit, breaking unit, pull and feed unit, raphe glue mechanism, clearance pocket conveyor, broken bag unit, trapezoidal bag cutting unit, rear synchronous feeding unit, working table.

Main Electrical List
1. Touch screen:  1
2. PLC: 1 Delta;
3. Frequency conversion motor: (Made in Jiangsu)380V,Taiwan inverter driver , Speed controller
4. One set servo system(wheel cutting) 380V;
    Mo 1.1 /Nm Io  Nn1200r/min
    MN 16  5Nm In    Ke22  5V/100rmin
    TH.CL.F.  IP64
5. Servo motor and servo driver  380V;
6. DZ47 breaker    1P 20A 1P 6A;
7. Intermediate relay  HH52P  AC200V;
8. AC contactor coil  AC220V  60A;
9. Mushroom stop self-locking switch (red), button:Schneider;
10. Indicator light (green);
11. Solid state relay (single phase 1.5KW);
12. Alarm lamp (sound, light);
13. Proximity switch:2   (Made in Germany)
14. Switch power supply  DC24V  2.1A;
15. change-over switch;3,Schneider;
16. Universal temperature control meter (Made in Shanghai).
17. Photoelectric color sensor:(Made in USA).

4 color 1200mm flexible relief printing parts
Printing machine / host part main Parameter:

1. Machine type:   3/ 1200mm
2. Printing material: Drum kraft paper, 75-110g   
3. Maximum printing width:  1100mm    
4. Maximum printing length: 300-1000mm
5. Printing speed:  10-50m/min
6. Plate thickness (including double-sided adhesive): 3.64mm
7. Machine size: 5000*2200*2100mm

Discharge part

1. Roll length: 1200mm
2. Effective printing roll length: 1000mm
3. Roll core diameter: 76mm
4. Maximum discharge diameter: 1250mm

Printing Part:

1. Printing composition:  Chrome roller  printing roller  Anilox roller  roller
2. Roll perimeter: Equipped with one set,( Customer determine size)
3. Printing plate material: Resin offset
4. Printing registration: 360 degree rotation( Each set stir the ink Standby)
5. Up and down version adjustment: Automatic(Medium machine manual)

Heating and drying part:

1. Heating drying method: Blowing heating
2. Heating area: three color: 10pcs
3. Heating power: 1200mm type 6kw
4. Fan power: 0.75kw
5. The main machine adopts frequency converter to control speed, online synchronous

Hospital Dressing Cart

Dressing Cart,Hospital Dressing Cart,Medical Dressing Cart,Stainless Steel Dressing Cart

Jiangmen Jia Mei Medical Products Co.,Ltd. , https://www.jmjiameimedical.com