The salt spray test chamber is mainly used to test the corrosion resistance of the product through the salt spray produced by the equipment, and the key to the production of salt spray is formed by the test solution being sprayed through the nozzle under a certain pressure of compressed air. Therefore, the quality of a nozzle is also a direct factor in the success or failure of the test. On the design of the nozzle, there are very strict controls on the nozzle's bending angle and aperture, so as to ensure the standardization of the salt spray produced. In addition, in the daily operation, the occurrence of cracks and clogging of the nozzles will have a certain impact on the normal operation of the test. For this case, Shanghai Linpin Instrument Co., Ltd. has several minor maintenance here. The secret is for everyone to better protect the nozzle of the test chamber.

1) For the installation of the oil-water separator, the air moisture and oil should be avoided when the air is compressed. At the same time being carried in will cause the oil pollution to adhere to the nozzle wall, and because the nozzle's aperture is relatively small, both the water impurities and the attached oil will affect the salt fog.

2) The spray pressure of the spray nozzle of the salt spray test chamber should not be set too large. Normally, it should be in the range of 0.07 mp to 0.17 mp. If the pressure is too high, the nozzle may be easily broken.

3) The impact should be avoided. Attention should be paid to the principle of gentle handling when installing or using the nozzle or plugging the nozzle. Excessive force will cause the nozzle to be damaged.

4) In the salt spray test, distilled water or deionized water must be used to reduce impurities in the water, that is, to reduce the chance of nozzle clogging.

Facial Rejuvenation Treatment

Facial rejuvenation treatment is a nonsurgical procedure that can help you look as vibrant as you feel, and it doesn't require the time and risks associated with traditional cosmetic surgery. This nonsurgical treatment can provide multiple benefits to men and women who want to erase defects caused by aging, the sun, scarring, pollution, and skin conditions.

As we age, our bodies naturally lose fat. This is especially evident in the face. Fat loss is especially apparent in the hollowing of the eyes and cheeks. Soft tissue fillers help to reduce fine lines and wrinkles by adding volume and fullness back to the face.

Reborn PLLA fillers can stimulate skin to produce collagen to reduce fine lines and wrinkles, improve acne scars, diminish sun spots, relieve redness and rosacea, fill wrinkles, etc.Reborn PLLA fillers are not fillers. They are collagen stimulators.The main ingredient of Reborn is poly l-lactic acid.It can stimulate the growth of collagen.Then Reborn can fill wrinkles and increase volume.Reborn can be used on the face, eyes, temple, neck, hands, breasts, buttocks, thigh, feet, etc.

Reborn PLLA Dermal Filler has 4 contents:

• 150mg: less content for the problems around the eyes or forehead. Such as dark circles, eye bags, crow`s feet, fine lines, etc.
• 240mg: middle content for face, neck, hands, to fill the wrinkles.
• 360mg: popular content for more filling. For face, neck, hands, breasts, buttock, feet, body, etc.
• 500mg: hot selling content for filling volume of breasts, buttocks, penis, body.
• They are all the same except for the content.
• The effect can last for 30 months.

Reborn PLLA Hydrogel Filler has 5ml per vial:

• The main ingredients are PEG-PLLA-PEG,balanced salt and water.
• It can resolve 7 big skin problems at the same time.
• It makes the skin white,tender, replenish lost water and collagen, awakes the cell regeneration.
• Repairs the withered cells of the skin, shrinks of enlarged pores, reduces discoloration, patches of acne pits.
• The injection depth of hydrogel is 0.9-1.6mm.
• You can inject it with the mesogun, microneedle, or hand needle.
• It has the super long effects that will last more than 1 year after a few treatments.

If you want to konw more information or you want to make some changes,please contact us.

Email:info@rimlessindustry.com

WhatsApp:+86 18004455830

Facial Rejuvenation Treatment,Machine For Face Lift,Face Lift For Jowls,Face Lift Facial

Rimless Industry Co.,Ltd. , https://www.rebornplla.com