Solid wood furniture processing technology is mainly the processing technology of solid wood parts. The process of solid wood parts refers to changing the shape, size, or physical properties of raw materials through various processing equipment. When the raw materials are processed into products that meet the technical requirements, the sum of a series of work carried out is called the technological process. It consists of several processes. Drying - Ingredients - Wool Fabrication - Gluing - Bending - Net Processing - Component Assembly - Component Processing - Assembly, Finishing.

First, prepare

1. The board is dry, and the moisture content of the wood is controlled at 8% to 10%. If the dried wood has no moisture content above 50%, the dried wood is not prone to burst deformation.

2. Balance, put the dried wood naturally for a few days to restore the balance of the wood.

3. The raw materials for the choice of ingredients, the wood products can be divided into three kinds according to their parts: external materials, internal materials and dark materials. Appearances exposed on the outside, such as the surface of the desk, the visible part of the cabinet, etc.; internal materials used inside the product, such as the internal file, the bottom plate, etc.; dark material refers to the parts that cannot be seen under normal use. , such as drawer guides, cladding panels, lining strips, etc. Pay attention to frugality, internal cracks, blue changes, dead wood, and cracks when selecting materials.

4. Rough planer, set the thickness of the wool sheet.

5. Wind shear, trim length of wool board. The material is lengthened by the required length by 20mm.

6. Trimming, cut off unused edges on the wool board.

7. With the board, timber material selection board sub-line grain, mountain pattern, the same color match, with the width of the board according to the required width of reasonable margin. When the material is selected, internal cracks, end cracks, knots, blue stains, and dead wood must be removed.

8. Cloth glue, evenly spread the glue between the wood, the ratio of glue: curing agent (10-15 grams), puzzle glue (100 grams) ratio, adjust the glue about 500 grams each time.

9. Puzzles, the use of puzzle machines will be assembled wood, puzzle attention to height difference, length difference, color difference, thrift.

10. Aging, placing the glue on the wood for about 2 hours to allow the glue to freeze.

11. Sand planer, remove the excess glue between the wood, so that the wood board surface without glue.

12. Sawing is fixed and the width of the wood is fixed by a single saw.

13. Planer forming, planing the wood according to the desired shape.

14. Health, the wood naturally placed about 24 hours.

The company Sports Equipment Co., Ltd. mainly produces outdoor slides, kindergarten toys, children's furniture, outdoor equipment, kindergarten rubber mats, naughty castles, etc. It is a science and technology enterprise integrating design, production, sales, and after-sales services. Website:. Advisory telephone. The company's pleasure and dedication to serve you! Factory address: No. 16, Chuangqiang Road, Lucheng District, Wenzhou City Light Industry Park.

Plastic Slip Sheet

Pallet Slip Sheet,Paper Slip Sheet,Plastic Slip Sheet Pallet,Plastic Sheets For Slip

DONGGUAN YEE HUP TRADING CO,.LTD , https://www.yeehupacks.com