[ Chinese wardrobe net ] The long service life of the whole wardrobe is based on its own quality. On the other hand, it is naturally related to the use of its users. In this issue of China Wardrobe, check the overall wardrobe to install 20 details, let's get to know it.

1. Check the work before installation, find the abnormality, and feedback in the first time to make corrections in time.

2. Carefully check the matching of the drawing identification with the site to determine the installation sequence.

3. Pay attention to the protection of the product assembly during the installation process.

4. Beam position, top line, and cut-off angle of the closing plate should be carefully checked and cut accurately.

5. Note that the hole surface of the side panel of the No. 4 cabinet should not be placed in the No. 4 cabinet.

Overall wardrobe picture

6. When the nail backing plate is used, the diagonal of the measuring cabinet should be equal. If the solid layer is uneven, it should be flattened with a planing knife to nail the backing plate.

7. If the customer asks a question during the installation, it should be answered in time and the rationality of the disposal method should be informed.

8. If there is a problem with the installation, the installation worker must return to the installation note and return to the repair order to complete the tracking service.

9. After installation, you must first self-check, adjust, and then the customer acceptance, signature confirmation.

10. The entire installation service process must be completed after the customer has a clean environment.

11. If the cloakroom is high, install it from the inside out.

12. There is a top cabinet, the inside of the first cabinet, the lower cabinet and the upper cabinet are installed at the same time and then the lower cabinet is installed.

13. Adopt the vertical loading method, first and then the outside, from left to right and from right to left, the side panels are first connected to the main line, and the bottom line is fixed by the corner code. After the board, people have to climb out from the top cabinet. If the space in the top cabinet is too small, you can saw the back panel behind the drawer and then fix the back panel with the corner code.

14. There is an electric socket in the cabinet at the scene, which can be opened by the measuring ruler. The opening of the electric plug board is subject to the wall of the cabinet. If necessary, the electrical board can be mounted on the back panel without opening.

Bathroom Vanities

The bathroom vanity is one of the key focal points of any bathroom. Add style and functionality to your space with a new bathroom vanity. Whether you`re looking for a double-sink vanity or a single-sink vanity, a bathroom vanity with a top or without – we have you covered with a variety of sizes, colors and styles to fit your budget and storage needs.Effortlessly combining modern and traditional design, this single bathroom vanity is the perfect finishing touch for a bathroom remodel, or an easy way to update an existing space. Made from solid birch wood with an antique grey finish, it has a Carrara marble top with a backsplash, a ceramic under-mount sink, and three pre-drilled holes for a faucet of your choice. It has seven soft-close drawers that are perfect for keeping toiletries organized and out-of-sight, and two doors that open to reveal a single shelf for cleaning supplies or towels. Plus, it arrives fully assembled.

Bathroom Vanities,Bathroom Cabinets,White Sink Cabinet,White Bathroom Cabinet

HOPE IKEA , https://www.shenyangwood.com