How to identify if the furniture is real wood

【Abstract】Evaluate whether the furniture is really made of solid wood, or indicate where the solid wood is, where is the wood-based panel. Peek into the mystery of wood: wood grain and knots. This is the method disclosed by the industry to identify whether it is a piece of solid wood. For example, if a cabinet door looks like a pattern, then the corresponding pattern of the pattern changes, and the corresponding pattern is seen on the back of the cabinet door. If the correspondence is good, it is a pure solid wood cabinet door. Also look at the knot is also a good way to identify pure wood: optimistic about the location of the scar side, and then find the corresponding pattern on the other side. Mei Luomei furniture http:// share.

What kind of wood is made of wood, which directly affects price and quality. In the north, ordinary solid wood furniture usually uses eucalyptus, white oak, ash, eucalyptus, eucalyptus, rubber wood and eucalyptus, while the precious mahogany furniture mainly uses "rosewood, wenge, rosewood". The market for solid wood furniture is rather chaotic, and there are often things that are shoddy and confusing. It is best to buy brand-name products. At the same time, note that the price of wood can only be higher and higher, and it is too cheap to be fraudulent.
Observe the pros and cons of wood. Open the furniture cabinet door and drawer to observe whether the wood is dry and white, and the texture is tight and delicate. If furniture made of particleboard, MDF, and one-time molded board is used, it is required to open the door or drawer without irritating odor.
Observe the wood for defects. The main stress-bearing parts of the furniture, such as the column and the load-bearing horizontal strip connecting the column to the ground, should not have large knots or cracks or cracks. The structure is firm, the frame must not be loose, and it is not allowed to break or break the material. Don't buy the "three-in-one" that uses a saw to cut a particle board, nail it with a nail, and paint it with a paint. Don't buy furniture made of "three no" drawers that help you with no bad, no flaws, no straps at the end. . The components of the wood-based panels used in the furniture shall be edge-sealed, and the various accessories shall be installed with few pieces, missing nails and nails.
Check whether there is a drawer or door frame tilting phenomenon, whether there is a skew of the eye position caused by the twisted eye socket or the eye hole is too large, and the hoe is not strict. Wooden furniture should have safety and stability. When the two doors are opened 90 degrees, the hand can be gently pulled forward, the cabinet can not be tilted forward automatically; the glass of the bookcase door should be edging; the mirror and The dressing table should be equipped with a back panel, and the bead should be fixed to the glass surface. Individual parts of the furniture (such as legs, drawers, doors or brackets) must be supported. You should push the top corner of the furniture or sit on one side and try to make sure the furniture is firm.
Check the slides and latches of the drawer. The drawer should be solid and secure with the screws tightened inside. It is a good idea to open the drawers, the event table, the doors and other parts to ensure that they can be used freely and properly connected.
Place your hand on the surface of the furniture and carefully check that the polished surface is smooth, especially to avoid roughening of the legs. Are there any streaks in the pigment? Is the pigment in the corner position too thick? Are there cracks or bubbles?
Is the edge, top, front and back interface of the furniture an inlay joint, a tongue-and-groove joint, or a double dowel joint? It is advisable to purchase a dovetail joint or a butterfly joint. Heavier furniture should be screwed with a protective block in the corner and glued. As for the back plate part, it is also necessary to check whether it is set and the screws are attached.
Turn the chair upside down on the furniture and look at how they are made. As for the table, check from the bottom. See if the seams are reinforced with screws and wedges? Is the strip and the buckle fastened? There are no excess glue and filler in the seams.

Paper Towel Holder

Paper Towel Holder,Kitchen Roll Holder,Wall Mount Paper Towel Holder,Wall Paper Towel Holder

Heshan Zhongxin Sanitary Ware Ind., Co., Ltd , https://www.baolongfaucet.com