Attention should be paid to the cleaning and maintenance of the offset press to meet the quality requirements of the product and reduce the failure rate of the equipment. The main cleaning parts of the offset press include:

Water bucket cleaning

Remove paper dust, impurities, etc. from the water bucket. Do not spill impurities in the water bucket on other parts. Also carefully check the parts near the water bucket for rust, water leakage and the surface of the water shaft. Clean and clean.

2. Parts cleaning

When the offset printing machine is stopped, do not leave any ink on the rubber roller, etc., and do not let the ink dry on it. If it is found, it should be cleaned in time. Otherwise, the ink conjunct film will damage the rubber roller. If the two-color offset printing machine is not used for three days, the glue should be used. The roller is removed and wiped clean to avoid squeezing deformation.

3. Track cleaning

Such as chain, the track is easy to accumulate paper ash, dusting, must be cleaned after adding oil, keep the track clean, while cleaning the chain on the track, conveyor belt and so on.

4. Gear cleaning

Offset gears are easy to stick to grease, paper ash, glue, etc., so they should be cleaned regularly. Clean the tank, check the oil concentration, impurities, change the oil regularly, and clean the filter.

5. Clean the ends of the rubber roller

For the offset bearing, the teeth, the dental pads, etc., especially the bearings at both ends of the rubber roller, to avoid the hindrance of the rotation of the bearing caused by the ink and the gel. The teeth and pads should be cleaned regularly with a brush until the surface is exposed.

Article source address: http://

Sit Stand Mobile Desk

Stand up and avoid the potential health risks from sedentary behavior. Burn calories, stretch your legs and get active while you work and study.

Work the way you want with HollinSit-Stand Mobile Desk Cart. This desk is height-adjustable with a lever operated pneumatic cylinder coated in a silver finish. Adjust the desk with the touch of a lever from different height. The rectangular top features an elegant white finish with inwardly beveled edges--it's also big, Mobility and stability matter, so we designed this desk cart with a rolling, wobble-free steel base; includes a pair of normal and locking casters. Use it your way: at home, as a Computer Table; in school classrooms, as a podium; or at work as an ergonomic alternative to standard office desks.

Sit Stand Mobile Desk,Medical Bedside Table,Adjustable Laptop Desk,Sit to Stand Desk

Foshan Hollin Furniture Co.,Ltd , https://www.chnhollin.com