As the "face project" of the whole suite, the function of the ceiling can not only avoid the vision brought by the messy wires and rough walls, but also hide the light strips and activate the local space. However, the ceiling is also prone to cracking and other problems. Zhang Feng, a senior decoration industry person, believes that the ceiling installation depends on the height of the room. The choice of light steel keel has advantages.

Ceiling installation, beware of the three major misunderstanding floor heights into the installation key

In general, the height of commercial buildings is 2.6 to 2.8 meters. If the floor height is less than 2.5 meters, it is not suitable for large ceilings in the room. Installing a ceiling in a relatively small space can create tension and depression.

For example, hanging a circle of a dozen-centimeter-wide, 10-18-centimeter-high secondary roof around the house, with the upward-illuminated light, while the middle part remains at the original height, and the top of the roof can be brushed with a light blue paint. It is relatively empty and can enrich the top level.

In addition to the height of the floor, the personalized ceiling shape is also easy to be one of the misunderstandings. Some owners choose glass, mirror and other materials to make the ceiling become a place to hide dirt, which brings difficulties to the usual cleaning. The insiders suggest that the color light source has become one of the taboos of the ceiling. If you choose a colorful light bulb, it will make the whole room feel confusing and destroy the indoor living atmosphere.

For rooms with higher floor heights, in addition to illuminating concealed projects such as lighting power supply, video and audio lines, etc., you can freely choose ceilings and shapes such as curved, circular, square, and shaped tops, or you can divide them into two levels. Even multi-level ceiling molding and large ceilings can be used to reduce the height of the floor.

Ceiling anti-cracking attention material and process light steel keel is more dominant

When the indoor and outdoor temperature difference is large, there are many problems in the decoration of the home improvement project. For the ceiling with the common cracking problem, the material process and the construction environment are the two main causes.

According to reports, the material of the ceiling includes the skeleton material, the cladding material, the caulking material and the boom. If the quality of the skeleton material does not meet the requirements, it will directly affect the firmness of the entire skeleton, which is an important reason for the cracking and deformation of the ceiling. For example, if the rigidity and straightness of the keel and the boom are not enough, internal stress will be generated, and the gypsum board will inevitably undergo deformation and cracking during the release of the internal stress.

Improper environment is another cause of cracking and cracking of the ceiling. Humidity is the most important environmental factor affecting the cracking deformation of gypsum board and plywood. During the construction process, there is moisture from all aspects, so that the plate absorbs the surrounding moisture, and gradually shrinks and shrinks during long-term use, thereby causing cracks in the joint. Therefore, the air humidity should be reduced as much as possible during construction, and good ventilation should be maintained. Try to wait until the concrete moisture content reaches the standard before construction.

According to industry insiders, if there is a crack in the ceiling of the new home, don't panic, notify the decoration company to carry out the warranty. After a four-year reincarnation test, the structure will stabilize and there will be no cracking of the ceiling.

Plasma Pen

Plasma Pen,Plamere Plasma Pen,Plasma Skin Tightening,Plasma Pen Plamere

Guangzhou serika Technology Co., Ltd. , https://www.serikamedical.com