On November 5th, in a carton factory in Wu'an Town, Changtai County, Fujian Province, an employee was accidentally manipulated and his right arm was caught in the roller of the machine. The blood flow was not limited.

At 18:54 on the evening of November 5, Changtai Fire received an alarm. An employee in a carton factory in Wu'an Town, Changtai County, Fujian Province, was accidentally manipulated and his right arm was caught in the roller of the machine. The fire immediately rushed to the scene. Dispose of.

At the scene, the firefighter saw a man standing on the side of the factory floor machine, the right arm was caught in the machine wheel, the blood flow was not only, the expression was very painful. After on-site inspection, the firefighters found that the roller of the machine was made of steel, the slit was small, the injured arm was stuck tightly, and it was difficult to cause secondary damage through hydraulic expansion. The fire rescue personnel decided to check the machine. The station was demolished.

The firefighters immediately cooperated with the factory technicians, removed the machine fasteners, removed the machine wheel, and a firefighter comforted the injured, and always pay attention to the wheel changes to prevent the process from being removed during the disassembly process. The sleepy man caused two injuries.

After 10 minutes of unremitting efforts, the injured person's arm was successfully taken out, and the on-site 120 emergency personnel immediately performed emergency treatment.

To prevent safety accidents, carton factories must do these things!

In the carton factory, machine roll events occur from time to time. Not long ago, on October 14, a worker's arm was caught in a paper machine in the carton workshop of Bafang Food Factory, Xiapu Village, Zhangye Town, Hui'an County, Quanzhou City, Fujian Province. At that time, she was operating the machine alone, and suddenly both arms were caught in the machine. After seeing the workers, they quickly turned off the power and called for help.

Analysis of the causes of these accidents, it is not difficult to see the similarities: mechanical transmission, rotating parts protection device is missing, no warning signs; staff handling fault violations, etc., eventually caused a screen of surprise in the monitor.

In order to prevent such accidents, carton factories should not only strengthen safety training, but also what should be done? The following four points must be seen!

1. Safety warning sign

Safety warning signs should be set for dangerous parts such as mechanical transmission and rotation.

2. Protective cover

Protective parts and transmissions that may cause dangers such as entanglement, inhalation or entanglement, puncture, etc. shall be provided with a protective cover. The safety distance of the protective cover shall comply with the "Safety distance of mechanical safety to prevent upper and lower limbs from reaching dangerous areas" (GB 23821-2009) ) related regulations and ensure that they are effective.

3. Interlocking device

Energy locks should be used during equipment maintenance. It is strictly forbidden to dismantle the interlocking device and the protective device without authorization.

4. It is strictly prohibited to operate illegally

Personal protective equipment must be properly worn as required before operation. The shawl hair and long squat must be covered in the work cap. It is possible to wear gloves, wear scarves, aprons, and not to wear accessories on the neck. It is not allowed to wear high-heeled shoes and slippers.

When operating mechanical equipment that poses a risk of injury to the human body, check that the safety protection device is complete and reliable, otherwise operation is not allowed.

It is not allowed to disassemble and move various safety protection devices, safety signal devices, protective fences, warning signs, etc.

When repairing machinery and electrical equipment, you must cut off the power supply and hang the warning sign "No repair is being activated". Before closing, you should check carefully to confirm that the unsupervised rear is closed.

Editor in charge: Zheng

This article is posted on the website for the purpose of transmitting more information and does not imply endorsement of its views or confirmation of its description.

Article source address: http://

Silicone Bottle

Silicone Bottle,Silicone Feeding Bottle,Silicone Milk Bottle,Silicone Sipper Bottle

MeMe Baby Product (GZ) LLC , http://www.kupbo.com