[ Chinese wardrobe net ] Wardrobe is one of the indispensable furniture in the home life. Many families also attach great importance to the selection of wardrobes. Whether it is a traditional wardrobe or a custom wardrobe selection is very important. In addition to paying attention to the environmental protection function of the board, we must also pay attention to its own quality. If you buy a plate of easy-to-worm insects to make a wardrobe, the clothes are bound to be destroyed. So how do you choose the wardrobe material selection?

Wardrobe material selection ranking introduction

The first composite solid wood, moisture-proof board, solid wood paint-free board is both moisture-proof, environmentally friendly and cost-effective. The national wardrobe products have experienced more than ten years of development and more than ten years of experience. It is enough to decide that the moisture-proof panels for wardrobes are the best choice. The moisture-proof panels of wardrobes can be used in heavy humid environments to see their high quality. Due to the brittleness of the board, the requirements for production equipment are higher. Nowadays, the new residential wall will be decorated with a small amount of water. The overall wardrobe (the overall wardrobe decoration effect diagram) can not be ventilated after the installation of the back panel part of the wardrobe requires a better moisture-proof sheet. The moisture-proof board is immersed in water due to the long-fiber of wood and the green moisture-proof agent soaking to a certain extent and no longer expands. Therefore, most of the brand wardrobes use the moisture-proof board as the main material of the cabinet.

The second place, the regular manufacturer of particleboard and MDF, the same material produced by the particle board is more environmentally friendly than the MDF. In fact, the simple molding of wood does not require glue and environmental protection is definitely nothing to say. If the amount of glue used to cut into 1 piece and 5 pieces is not the same, the less glue is, the more environmentally friendly. MDF is also called MDF. It is made of wood powder. The flatness is better. It is more suitable for boring and milling. It is usually used to make stencils such as paint blister. In addition, the MDF material is less prone to blasting when it is softer, and it is easier to process. Therefore, many small factories use medium denier. Moisture-proof performance, the moisture resistance of the particle board relative to the moisture-proof board is very poor. If the green core moisture-proofing agent is in a humid environment for a long time, the wood is prone to mold and corrosion. The raw material of the MDF is wood powder. The medium density board is soaked in water and will swell like a cake.

Third place, small factory low-cost production of particle board Most small manufacturers consider the cost of the use of particle board, that is, solid wood particle board using ordinary glue cost is the lowest among the three materials. The fourth place, the ecological board (referring to the ecological board produced by the small workshop), the large core board or the sandwich board plus the double-sided paste, the quality of the sandwich surface. The sandwich board is commonly known as the blockboard, and the wood board is a plywood with a solid wood core. The force of cutting the logs into strips and splicing into the outer surface of the core is from the thin two layers of the outer veneer. The middle of the veneer is spliced ​​and the substrate is basically unstressed and easily broken and deformed. Most of the plates used in this kind of plate are made of fir for one or two years, and the nails can be broken by several fingers, which is several times lower than the national standard.

In terms of environmental protection, the advantage of the eco-board is that the substrate looks good and it feels like wooden blocks. The name of the eco-board is also very nice and environmentally friendly. As we all know, the environmental protection standard of the board is mainly glue, and the cost of the environmentally-friendly E0E1 glue is very high. The small-scale factory will never use this kind of environmentally friendly glue, all of which use industrial glue, and the cost is relatively low. Almost all large-scale brands in the national furniture market will not use ecological boards or fir boards. Before 2005, almost all the new houses were decorated with sandwich panels, almost all of which exceeded the standard. Since the rise of the large wardrobe brand, the use of moisture-proof panels and MDF has rarely heard environmental standards.

Copper Coated Paper Sticker

Copper Coated paper self-adhesive labels are the most common material in self-adhesive labels. Coated paper self-adhesive labels are often used as materials for printer printing labels, and the thickness is generally about 80g. Coated paper stickers are widely used in supermarkets, inventory management, clothing tags, industrial production lines, etc

Copper Coated paper Sticker Features: Semi-gloss white coated paper, basic weight 80 g/m2, surface substrate thickness 72 times, and overall label thickness 147 times. The operating temperature range is -50 degrees +90 degrees, and the minimum labeling temperature is +7 degrees.

Application range: Widely used in supermarkets, inventory management, clothing tags, industrial production lines, suitable for promotion and industrial semi-gloss color printing. Typical uses are cosmetic labels, pharmaceutical labels and food industry labels.

It can be pasted on the flat and simple curved surfaces of most substrates, including cardboard and plastic film.

Cooper Plate Sticker,Copper Paper Custom Stickers,Cooper Sticker Paper,Cooper Adhesive Stickers

Shijiazhuang Qiancen Industry Co.,ltd , https://www.yuyilang.com