When customers make product promotion and publicity budgets, they will be anxious to know the cost of printed matter, and to understand some of the necessary printing common sense, which is very important for you to select printing partners, master printed matter quotation, and save precious time. Generally speaking, the more you understand the common sense of printing, the more detailed it is, the more accurate our quotation. Therefore, we have prepared this customer inquiry note and hope to serve you better.

The delivery time depends on the requirements of the printing order. The production cycle is generally 3-7 working days, usually within 4 working days. The more complicated the post-press processing technology (such as: laminating, binding, die cutting, UV, bronzing, etc.), the longer the cycle, generally more than 4 working days, long-term customers can enjoy the urgent service without urgency fees. Paying attention to the following aspects of the document will help you save valuable time.

1. Please confirm that there are all the necessary files in the document. Please confirm that the image file must be included in the document. Sometimes the image can be displayed on the display, but the image is actually missing or the resolution is low, so please confirm the necessary image and provide sufficient accuracy The image file is in the document. (The picture resolution is not less than 280 pixels / inch)

2. Don't forget to copy in the necessary fonts, please make sure to provide the necessary files. Although some fonts are displayed, you still need to copy in the fonts that can be output to output the film. Only fonts that are guaranteed to be displayable and enterable will not waste your own time.

3. Don't forget to change the color of the linked image from RGB to CMYK, otherwise the film will appear chaotic after filming.

4. When Pantone spot color is converted to CMYK color, please confirm whether it will achieve the same effect. After Pantone spot colors are converted to CMYK, the two will generally have some differences. After some Pantone spot colors are converted to CMYK, the same effect can be achieved according to the output experience, but those Process Pantone Colors are definitely not achievable by CMYK, so only It can be solved by increasing the spot color.

5. Double scanning of pictures; single output can improve the scanning quality of pictures.

6. Is the typesetting file set for bleeding 3 ?; Is the color in the typesetting software set according to the color scale value?

7. Printing proofing is the most worry-free reference for printing plants. If there is no proof, we must provide at least one print (color, black and white), so that we can check the film.

Film (film) proofing is closest to the finished product. The effect of the printed product displayed on the computer screen is much brighter than the actual printed product and cannot be used as a reference object.

Because the color formation of the display and color printing paper products is quite different. The display uses the three primary colors of red, green, and blue to emit light to form an image. The principle of this color formation is called RGB, and it is widely used in televisions and computer monitors.

Color printing is red, yellow, blue and black inks printed on paper products to form a color image. This principle is called CMYK, and it is widely used in four-color offset printing technology.

Another important reason is the obvious difference between computer display and printed matter, namely the color standard of the monitor. If your computer monitor fails to perform color correction correctly, the computer display effect will also be significantly different from the computer monitor that has been color corrected correctly. Therefore, it is also necessary for professional and technical personnel to adjust the display effect in time. [next]

Different printing materials will also make the printing effect appear different. Generally speaking: the printing effect of coated paper is brighter than that of offset paper. The above preparations can help you and us to reduce all kinds of possible problems. Speed ​​up the delivery process to avoid increasing costs.

The printing process can be simply divided into three parts: pre-printing, printing, and post-printing.
The calculation of printing cost can also be divided into the above three parts, and the combination of the three is the price of the printed matter.

1. Early printing:
The process of completing the film and proofing is calculated per P, and the design, publication, printing, and group version are generally A4 (210 × 285?) As the pricing standard. Film film is a necessity for the machine, and printing proofing is the most basic basis for the collator to check the color.

2. print:
The key link for the completion of printed matter is printing, and the pricing standard is the color order (that is, each color of each order paper). Please specify, then it will increase from 4 colors to 5 colors, 6 colors.

3. Late printing:
It is usually the processing work after the printing of the printed matter. Be sure to indicate: riding nails or plastic nails, folding (how many folds?); Whether there is laminating or UV in the post-printing process, the area of ​​die cutting, bronzing and embossing should also be clearly written, and the packaging materials and packaging quantity are available Please also specify special requirements. The more specific and accurate the process is. The more accurate and timely the price, the more accurate you will get.

Bamboo Light Outdoor Fencing

Bamboo Wooden Fencing,Bamboo Fencing Waterproof,Exterior Bamboo Fence,Wall Siding Bamboo

ZHEJIANG JIAHE BAMBOO TECHNOLOGY CO., LTD , https://www.zhuart-bamboo.com