Beijing human islet cell antibody (ICA) ELISA kit price, human ICA spot ELISA instructions
November 16 06:59:37, 2024
Beijing human islet cell antibody (ICA) ELISA kit price, human ICA spot ELISA manual human islet cell antibody (ICA) enzyme-linked immunosorbent assay (ELISA) kit instruction manual This reagent is for research purposes only: This kit is used for Islet cell antibody (ICA) levels in human serum, plasma and related fluid samples were determined. Experimental principle: The kit uses double antigen sandwich enzyme-linked immunosorbent assay (ELISA) to determine human islet cell antibody (ICA) in the specimen. The microplate is coated with purified human islet cell antibody (ICA) antigen to prepare a solid phase antigen, which can be combined with islet cell antibody (ICA) in the sample, washed to remove unbound antibody and other components, and then HRP. The labeled islet cell antibody (ICA) antigen binds to form an antigen-antibody-enzyme-labeled antigen complex, which is thoroughly washed and then added to the substrate TMB for color development. TMB is converted to blue under the catalysis of HRP enzyme and converted to the final yellow color by the action of an acid. The absorbance (OD value) was measured at 450 nm using a microplate reader and compared with the CUTOFF value to determine the presence or absence of human islet cell antibody (ICA) in the specimen. Kit composition: Kit composition 48-well configuration 96-well configuration Storage instructions 1 copy 1 part sealing film 2 pieces (48) 2 pieces (96) sealed bag 1 piece of enzyme-labeled plate 1×48 1×96 2 -8°C Preservation Negative Control 0.5ml×1 Bottle 0.5ml×1 Bottle 2-8°C Preservation Positive Control 0.5ml×1 Bottle 0.5ml×1 Bottle 2-8°C Preservation Enzyme Standard Reagent 3 ml×1 Bottle 6 ml×1 Bottle 2-8 ° C Preservation Sample Diluent 3 ml × 1 Bottle 6 ml × 1 Bottle 2-8 ° C Preservation Developer A Solution 3 ml × 1 Bottle 6 ml × 1 Bottle 2-8 ° C Preservation Developer B Solution 3 Ml × 1 bottle 6 ml × 1 bottle 2-8 ° C Preservation solution 3 ml × 1 bottle 6 ml × 1 bottle 2-8 ° C Preservation concentrated washing solution (20ml × 20 times) × 1 bottle (20ml × 30 times) × 1 bottle Sample processing and requirements at 2-8 °C: 1. Serum: The blood is naturally coagulated for 10-20 minutes at room temperature and centrifuged for about 20 minutes (2000-3000 rpm). The supernatant is carefully collected, and if precipitation occurs during storage, it should be centrifuged again. 2. Plasma: EDTA or sodium citrate should be selected as an anticoagulant according to the requirements of the specimen. After mixing for 10-20 minutes, centrifuge for about 20 minutes (2000-3000 rpm). The supernatant is carefully collected, and if a precipitate forms during storage, it should be centrifuged again. 3. Urine: Collect with a sterile tube and centrifuge for about 20 minutes (2000-3000 rpm). The supernatant is carefully collected, and if a precipitate forms during storage, it should be centrifuged again. The chest and ascites and cerebrospinal fluid are referred to. 4. Cell culture supernatant: When detecting secreted components, collect them in a sterile tube. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. When the components in the cells were detected, the cell suspension was diluted with PBS (pH 7.2-7.4), and the concentration of the cells 7 reached about 1 million/ml. By repeated freezing and thawing, the cells are destroyed and the intracellular components are released. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. If a precipitate forms during storage, it should be centrifuged again. 5. Tissue specimen: After cutting the specimen, weigh the weight. Add a certain amount of PBS, pH 7.4. It was quickly frozen and stored in liquid nitrogen for use. The specimen still maintains a temperature of 2-8 ° C after melting. A certain amount of PBS (pH 7.4) was added, and the specimen was homogenized by hand or homogenizer. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. One part of the package is to be tested, and the rest is frozen for use. 6. The specimens should be extracted as soon as possible after collection, and the extraction should be carried out according to the relevant literature. The experiment should be carried out as soon as possible after extraction. If the test cannot be performed immediately, the specimen can be stored at -20 °C, but repeated freezing and thawing should be avoided. 7. Samples containing NaN3 cannot be detected because NaN3 inhibits horseradish peroxidase (HRP) activity. Operation steps: 1. No.: The corresponding micropores of the sample are numbered sequentially. Each plate should have 2 holes for negative control, 2 holes for positive control, and 1 well for blank control (no blank sample and enzyme standard reagent for blank control well, the other steps The same) 2. Loading: Negative control and positive control 50 μl were added to the negative and positive control wells, respectively. Then, add 40 μl of the sample diluent to the sample well to be tested, and then add 10 μl of the sample to be tested. Add the sample to the bottom of the well of the microplate. Try not to touch the wall of the well. Gently shake and mix. 3. Incubate: Cover with a sealing plate and incubate at 37 °C for 30 minutes. 4. Liquor: Add 30 (48 times of 20T) concentrated washing solution to distilled water to 600ml and then use it. 5. Wash: carefully remove the sealing film, discard the liquid, dry, fill each well with washing liquid, and let stand. Discard after 30 seconds, repeat 5 times, and pat dry. 6. Add enzyme: Add 50 μl of enzyme labeling reagent to each well, except for blank wells. 7. Incubation: Operation is the same as 3. 8. Washing: operation is the same as 5. 9. Color development: Add 50 μl of developer A to each well, then add 50 μl of developer B, gently shake and mix, avoid at 37 °C Color development for 15 minutes 10. Termination: 50 μl of stop solution was added to each well to stop the reaction (the blue color turned yellow). 11. Measurement: The absorbance (OD value) of each well was measured sequentially with a blank air conditioner of zero and a wavelength of 450 nm. The measurement should be carried out within 15 minutes after the addition of the stop solution. RESULTS: Validity of the test: mean value of positive control well ≥ 1.00; mean value of negative control ≤ 0.10 threshold (CUT OFF) calculation: critical value = average value of negative control well + 0.15 negative judgment: OD value of sample
Related download
Beijing human islet cell antibody (ICA) ELISA kit price, human ICA spot ELISA manual.zip
Click to enter the booth of Beijing Dongge Boye Biotechnology Co., Ltd. to see more I want to contribute
Sweep, welcome attention
Education Equipment Purchasing Network Official WeChat
Master the latest and most authoritative information in the education equipment industry
Copyright and Disclaimer:
1 All the works of the “Source: China Education Equipment Purchasing Network†are copyrighted by the China Education Equipment Purchasing Network. They may not be reproduced, extracted or used in other ways without the authorization of this website. Works that have been authorized by this website should be used within the scope of authorization, and indicate "Source: China Education Equipment Purchasing Network". Offenders will be held accountable for relevant legal responsibilities.
2 Any work that states "Source: XXX (not this website)" is reproduced from other media. The purpose of the reprint is to transmit more information. It does not mean that this website agrees with its views and is responsible for its authenticity. Direct responsibility and joint liability for the infringement of such works. If other media, websites or individuals download and use from this website, they must retain the "source of the manuscript" indicated on this website, and bear the legal responsibility for copyright.
3 If you are involved in the content of the work, copyright, etc., please contact the website within two weeks from the date of publication of the work, otherwise it will be deemed to have waived the relevant rights.
